Continuous Syringe B type

Continuous Syringe Volume:1ML Function:Continuous Syringe Instructions For Use To Fit Needle

Continuous Syringe

Volume:1ML Function:Continuous Syringe Instructions For Use To Fit Needle

1.Safety -Leave protective cover on needle. 2.Unscrew nozzle nut until nib is below cutout detail on nozzle nut. 3.Insert needle base into cutout detail no nozzle nut. 4.Hold needle in cutout and screw nozzle nut until firmly onto barrel . 5.To remove needle replace protective cover .unscrew nozzle nut part-way until needle can be removed from cutout.

TO OPERATE FAST-FIT BOTTLE MOUNT 1.Prior to attaching a new bottle ,pierce rubber stopper on bottle with a sterile needle . 2.Using hand hold bottle. 3.Looking through bottle mount window ,make pierced rubber stopper in a straight line and press firmly ,until the clicking sound of the retention grips can be heard.

TO REPLACE BETTLE 1.In one hand using thumb and foreinger ,squeeze retention grips firmly together. 2.With the other hand grasp base of the blttle and pull firmly out of the fast-fit bottle mount. 3.To attach a new bottle,repeat steps 1-3.

TO SET DOSE Align front of piston to desired dose setting printed on the barrel, by turning dose adjuster either clockwise of anti-clockwise.

TO ADJUST SPRING HANDLE TENSION To increase handle-spring tension :turn spring tension adjuster clockwise,all the way until firm. To reduce handle -spring tension :turn spring tension adjuster anti- clockwise until tension has been eased

TO LUBRICATE:if plunger becomes sluggish : Remove barrel and lubricate piston o-ring with olive or cooking oil Attention:this products just can use disinfection water to disinfect. Remembering that boils disinfection and the high pressure steam disinfection .

Continuous Syringe B type